A3 plus DTF printer
Advantage :
1.Use self-developed motherboard. More stable and no double flash errors.2.It don’t need to clear and don’t need to do ink reset.3.With white ink mixing function to prevent the ink precipitation.4.L805 print head with low printing cost and maintenance cost.5.With out of paper protection function, once the machine without paper, then the machine will not print.Support A4/A3 sheet film and the 33cm roll film printing. The roll size is 33cm*100cmBi-directional printing is 2 times faster
Specification We have below package for choosing :
Operation :1. Use software draw the pictures , and then use the printer to print the pattern on the PET machine 2.Sprinkle an appropriate amount of hot melt poweron the printed PET film and shake off the excess hot melt power3. Put the PET film on the heat transfer machine and back for 5-7 minutes ,until the hot melt powder melts , take out the PET film4. Lay the T shirt flat on the heat transfer amchine and stick the sidesprinkled with hot melt powder on the T shirt for patternhot samping and the hot stamping takes 15-20 seconds
Printhead | For EPSON L805 |
printing speed | A4 1440*1440 6 points 1440*720 3 points |
Print software | 10.3 |
Printing accuracy | 1440*1440DPI |
Maximum printing width | A3/330mm |
ink type and configuration | Y K M C W W |















