Technical Details

Manufacturer	‎Printers Jack
Brand	‎Printers Jack
Item Weight	‎11.7 ounces
Package Dimensions	‎12.48 x 9.33 x 0.35 inches
Item model number	‎B08N6CBWM6
Color	‎For Light Fabric
Material Type	‎Paper
Size	‎20 Sheets
Paper Finish	‎Smooth
Manufacturer Part Number	‎Heat Transfer Paper for Light Fabric

Printers Jack The Color Ink Expert


	Heat Trasfer Paper for Dark Fabric	Heat Trasfer Paper for Dark Fabric	Heat Trasfer Paper for Dark Fabric	Heat Trasfer Paper for Light Fabric	502 Regular Refill Ink	522 Regular Refill Ink
Work with	All Printers Jack Regular Refill Ink	All Printers Jack Regular Refill Ink	All Printers Jack Regular Refill Ink	All Printers Jack Regular Refill Ink	All Printers Jack Heat Transfer Paper	All Printers Jack Heat Transfer Paper
Sheets	10	20	40	20
Paper Size	8.3\” x 11.7\”(A4)	8.3\” x 11.7\”(A4)	8.3\” x 11.7\”(A4)	8.3\” x 11.7\”(A4)
Applicable Printer	Inkjet Printer	Inkjet Printer	Inkjet Printer	Inkjet Printer	ET-2750 ET-3750 ET-4750 ET-2760 ET-3760 ET-4760 ET-2700 ET-3700 ET-3710 ET-15000 ST-2000 ST-3000 ST-4000 etc	ET-2720 ET-4700 Printers
Application Materials	DARK color cotton or nylon fabrics (more than 60% cotton content gives the best transfer results)	DARK color cotton or nylon fabrics (more than 60% cotton content gives the best transfer results)	DARK color cotton or nylon fabrics (more than 60% cotton content gives the best transfer results)	Light color cotton, nylon fabrics, polyester, canvas, etc(more than 30% cotton content gives the best transfer results)
Applicable Ink	Recommend to use Pigment Ink/Dye-Based Ink	Recommend to use Pigment Ink/Dye-Based Ink	Recommend to use Pigment Ink/Dye-Based Ink	Recommend to use Pigment Ink/Dye-Based Ink

Heat Transfer Paper Wide Applications

Tips before printing:

1.The ink to be used is preferably pigment ink/Dye-Based Ink.

2.The size of the heat transfer paper is 8.3×11.7 inch, please set the size of the paper to 8.3×11.7 inch before printing.

3.The soft side is the printable side, with red words “Printers Jack” is the back side.

4.If the picture printed on the paper has obvious streaks and indentations, please check your printer or ink.

Tips after transfer:

1.Do not pull the fabric forcibly after transfer, and do not wash within 24 hours.

2.When washing, the pattern should face inward, please use cold water.

3.Please do not use bleach or alkaline detergent when cleaning, please avoid rubbing pictures with your hands.

4.Please do not use a dryer to dry, high temperature will dissolve the picture, please dry naturally in a cool place.

5.Use on light color cotton, nylon fabrics, polyester, canvas, etc(more than 30% cotton content gives the best transfer effect)

Printing Professionals Love Us!

Quick Guide for difference of using iron and heat press: Transfer with iron


Step 1 Print the the image on front side of heat transfer paper; NEED MIRROR the image; After printing, allowed the paper to dry.	Step 2 Cut the paper into the shape you want, be careful not to leave out white edges.	Step 3 Make sure your iron doesn\’t have any water in it and the steam setting is off; Then set the iron to high or cotton setting.

Step 1

Print the the image on front side of heat transfer paper; NEED MIRROR the image; After printing, allowed the paper to dry.

Step 2

Cut the paper into the shape you want, be careful not to leave out white edges.

Step 3

Make sure your iron doesn\’t have any water in it and the steam setting is off; Then set the iron to high or cotton setting.


Step 4 Lay the garment on a hard, heat resistant surface and iron any wrinkles.	Step 5 Place the printed side face down on garment; Please make sure the paper is flat on the garment.	Step 6 If you use an iron, after the iron is heated to high temperature, transferring process is started, please apply firm pressure evenly about 2-3 minutes.(Every corner needs to be stressed evenly)

Step 4

Lay the garment on a hard, heat resistant surface and iron any wrinkles.

Step 5

Place the printed side face down on garment; Please make sure the paper is flat on the garment.

Step 6

If you use an iron, after the iron is heated to high temperature, transferring process is started, please apply firm pressure evenly about 2-3 minutes.(Every corner needs to be stressed evenly)